Announcing NGINX Plus R17

Announcing NGINX Plus R17

We are pleased to announce that NGINX Plus Release 17 (R17) is now available. NGINX Plus is the only all‑in‑one load balancer, content cache, web server, and API gateway. NGINX Plus is based on NGINX Open Source and includes exclusive enhanced features and award‑winning support.

New in this release is support for TLS 1.3, the latest version of the protocol that is responsible for all secure traffic on the Internet. It’s been over 10 years since TLS 1.2 was released, and a lot has changed since. Numerous security vulnerabilities were found in TLS 1.2, such as FREAK, Heartbleed, POODLE, and ROBOT. A lot of these vulnerabilities were a result of too many insecure configuration options in TLS 1.2 that left sites open to attack.

TLS 1.3 is addition by subtraction. Many insecure ciphers have been removed and Diffie‑Hellman key exchange is now mandatory. The result is a slimmed down, faster, and more secure TLS. As of this writing, Ubuntu 18.10 and FreeBSD 12.0 support TLS 1.3, so you can use them with NGINX Plus R17 for TLS 1.3 in your production environment; other OS vendors will doubtless support TLS 1.3 in future releases. Note that F5 BIG-IP and other hardware load balancers do not currently support TLS 1.3 in full.

NGINX Plus R17 also includes these new features:

• Two‑stage rate limiting – Rate limiting is one the most popular features in NGINX Open Source and NGINX Plus. It can be used to mitigate DDoS attacks and in general protect application servers from being overwhelmed with too many requests. The new delay parameter helps NGINX Plus rate limiting to better match typical browser request patterns. The existing delay and reject enforcement methods can now be combined to provide two‑stage rate limiting, whereby excessive requests are initially delayed and then ultimately rejected if the rate limit is still exceeded.
• Easier OpenID Connect configuration – In NGINX Plus R15 we introduced OpenID Connect integration to enable our customers to add single sign‑on (SSO) to their applications. In R17 we have simplified the configuration to automatically fetch the JSON Web Keys (JWKs) from the identity provider (IdP).
• NGINX WAF is 2x faster – The NGINX WAF (based on ModSecurity) provides robust protection against Layer 7 attacks. ModSecurity is actively being developed and the latest version of the NGINX WAF module includes 2x better performance and a number of additional improvements.

Additional enhancements in NGINX Plus R17 include TCP keepalives to upstreams, SNI support in clustered environments, and more.

Important Changes in Behavior

• NGINX Plus R13 introduced the all‑new NGINX Plus API for metrics collection and dynamic reconfiguration of upstream groups, replacing the Status and Upstream Conf APIs that previously implemented those functions. As announced at the time, the deprecated APIs continued to be available and supported for a significant period of time, which ended with NGINX Plus R16. If your configuration includes the status and/or upstream_conf directives, you must replace them with the api directive as part of the upgrade to R17.

  For advice and assistance in migrating to the NGINX Plus API, please see the transition guide on our blog, or contact our support team.

• New operating systems supported:

  • Ubuntu 18.10 (Cosmic)
  • SUSE Linux Enterprise Server 15
  • FreeBSD 11.2
  • FreeBSD 12.0 is also planned to be released today. We will release the NGINX Plus R17 build for FreeBSD 12.0 after we test it with the official FreeBSD build.

• Older operating systems removed or scheduled for removal:

  • FreeBSD 10.4 and 11.1 are no longer supported.
  • Support for CentOS/Oracle/RHEL 7.3 and earlier will be discontinued in NGINX Plus R18.
  • Support for Ubuntu 14.04 will be discontinued in NGINX Plus R19.

New Features in Detail

TLS 1.3: Addition by Subtraction

It’s been over 10 years since a major update to TLS. TLS 1.2 was defined in August 2008 as RFC 5246, and the Internet has changed significantly since then. TLS 1.3 was ratified in August 2018 as RFC 8446 to help address many of the issues found in TLS 1.2 and set a more scalable platform for the future.

More Secure

Over the years numerous security vulnerabilities in TLS 1.2 have been disclosed, such as POODLE, ROBOT, FREAK, and Heartbleed. FREAK, for example, allows an attacker to downgrade a TLS connection to use an export cipher with a 40‑bit key length, which can be brute forced. TLS 1.3 removes export ciphers altogether.

Many of the issues that have arisen with TLS 1.2 and earlier specifications are due to the large number of user‑configurable options. Misuse of options often led to insecure configurations which could be exploited by attackers. TLS 1.3 removes a number of these options:

• AES‑CBC
• Arbitrary Diffie‑Hellman groups
• Export ciphers
• DES/3DES
• MD5
• PKCS#1 v1.5 padding
• RC4
• RSA key transport (Diffie‑Hellman is mandatory)
• SHA‑1

Better Performance

Notable in the list of removals is RSA key transport. This mode was used primarily because it was faster than Diffie‑Hellman (PFS), which required an additional round trip to set up the connection. With TLS 1.3 that is no longer the case. With fewer configuration options, there is less information to exchange and the Diffie‑Hellman handshake takes just one round trip to complete.

Additionally, TLS 1.3 supports session resumption, which makes connection establishment faster by eliminating the overhead of repeating the TLS handshake when a client returns to a previously visited site. This is also called 0‑RTT (zero round trip time) resumption, because no handshake messages have to go back and forth between client and server for the resumed session. Session resumption is implemented by creating a shared secret during the original session and storing it in a session ticket. When the client returns, it presents the session ticket along with its request, which is encrypted with the shared secret that’s in the ticket.

Using 0‑RTT opens up the risk of a replay attack as illustrated below. In this scenario, the attacker re‑sends a packet that results in a state change, such as a request to transfer money between two bank accounts.

To protect against replay attacks, the only HTTP request type that clients should send in the 0‑RTT data (the data encrypted with the shared secret) is GET. HTTP GET requests are idempotent by definition (RFC 7231), so replaying them has no effect. Loading a page is usually the first thing a client does when revisiting a site, and most page loads start with a GET request, so enabling session resumption speeds up a large proportion of the requests to most websites. You might not want to enable 0‑RTT resumption when deploying NGINX Plus as an API gateway, however, because for API traffic resumed TLS sessions are more likely to contain non‑idempotent request types.

TLS 1.3 itself also protects against replay attacks by including timing information in the session ticket and the client request, which enables the server to determine if the request arrived from the client reasonably soon after the client sent it. An attacker can’t alter the timing information, so if the request took too long to arrive, it was probably replayed.

How to Enable TLS 1.3 in NGINX Plus

TLS 1.3 and 0‑RTT are not enabled by default.

To enable TLS 1.3, include the TLSv1.3 parameter to the ssl_protocols directive. We recommend that you also include TLSv1.2 because not all browsers support TLS 1.3 at time of writing (see the next section). NGINX Plus uses TLS 1.3 if the client supports it, and falls back to TLS 1.2 otherwise.

To enable 0‑RTT, also set the ssl_early_data directive to on.

This configuration enables both features:

server {
    listen 443 ssl;
    ssl_certificate     /etc/ssl/my_site_cert.pem;
    ssl_certificate_key /etc/ssl/my_site_key.pem;
    ssl_protocols       TLSv1.2 TLSv1.3;
    ssl_early_data      on; # Enable 0-RTT (TLS 1.3)

    location / {
        proxy_pass http://my_backend;
    }
}

Supported Platforms

On the server side, TLS 1.3 requires OpenSSL 1.1.1 or later. As of this writing only Ubuntu 18.10 and FreeBSD 12.0 ship with OpenSSL 1.1.1.

On the client side, we recommend Chrome 70 or Firefox 63. They support the final version of TLS 1.3, but don’t enable it by default; follow these instructions to enable TLS 1.3 in the browser. As of this writing, other popular browsers (including Firefox for Android and Safari for both iOS and Mac) do not yet support TLS 1.3. For the latest status information, see Can I Use: TLS 1.3.

Two‑Stage Rate Limiting

Previously, NGINX Plus could enforce limits on request rate in two ways: by rejecting excessive requests immediately, or by queuing excessive requests until they can be processed in compliance with the defined rate limit. With NGINX Plus R17, you can combine both enforcement methods for two‑stage rate limiting, whereby excessive requests are initially delayed, and ultimately rejected if the rate limit is still exceeded.

When applying rate limits, it is essential to consider the typical behavior of legitimate clients. For example, web browsers usually attempt to download several resources simultaneously, so it’s reasonable to see a request for the HTML content, followed quickly by requests for stylesheets, JavaScript code, and images. For this reason we might want to allow a burst of 10 to 20 rapid requests before applying a rate limit.

With NGINX Plus R17 you can now allow a burst to accommodate the typical web browser request pattern, and then delay additional excessive requests up to a point, beyond which additional excessive requests are rejected. Two‑stage rate limiting is enabled with the new delay parameter to the limit_req directive.

To illustrate two‑stage rate limiting, here we configure NGINX Plus to protect a website by imposing a rate limit of 5 requests per second (r/s). The website typically has 4–6 resources per page, and never more than 12 resources. The configuration allows bursts of up to 12 requests, the first 8 of which are processed without delay. A delay is added after 8 excessive requests to enforce the 5 r/s limit. After 12 excessive requests, any further requests are rejected.

limit_req_zone $binary_remote_addr zone=ip:10m rate=5r/s;

server {
    listen 80;
    location / {
        limit_req zone=ip burst=12 delay=8;
        proxy_pass http://website;
    }
}

The delay parameter defines the point at which, within the burst size, excessive requests are throttled (delayed) to comply with the defined rate limit. With this configuration in place, a client that makes a continuous stream of requests at 8 r/s experiences the following behavior.

The first 8 requests (the value of delay) are proxied by NGINX Plus without delay. The next 4 requests (burst - delay) are delayed so that the defined rate of 5 r/s is not exceeded. The next 3 requests are rejected because the total burst size has been exceeded. Subsequent requests are delayed.

Note that this illustration is a simplified description of the process because it ignores the impact of completed requests on calculating how many excessive requests are being processed. In reality, each completed request opens up a slot in the delay queue for another excessive request to fit within the configured burst size. For more information about the rate‑limiting implementation, see Rate Limiting with NGINX and NGINX Plus on our blog.

Easier OpenID Connect Configuration

When performing JWT validation, NGINX Plus R17 can now be configured to fetch the set of JSON Web Keys (JWKs) from the remote location (usually an identity provider, or IdP) specified by the new auth_jwt_key_request directive. Automatic fetching is particularly convenient when integrating with an IdP that rotates keys frequently.

Most IdPs provide a fixed URL where the current set of keys can be obtained, especially if they support OpenID Connect Discovery; in that case, the URL to the keys is defined by the jwks_uri value.

# Create a directory to cache the keys received from IdP
proxy_cache_path /var/cache/nginx/jwk levels=1 keys_zone=jwk:1m max_size=10m;

server {
    listen 80; # Use SSL/TLS in production

    location / {
        auth_jwt "closed site";
        auth_jwt_key_request /_jwks_uri; # Keys will be fetched by subrequest

        proxy_pass http://my_backend;
    }

    location = /_jwks_uri {
        internal;
        proxy_cache jwk; # Cache responses
        proxy_pass https://idp.example.com/oauth2/keys; # Obtain keys from here
    }
}

Additional caching directives can be used to override the Expires and Cache-Control headers returned by the subrequest. The use of proxy_cache_use_stale allowws NGINX Plus to continue using cached keys when the keys URL is unavailable.

Our OpenID Connect reference implementation has been updated to include support for auth_jwt_key_request and automatic configuration for IdPs that support OpenID Connect Discovery.

JWT support has also been extended to support two variants of the Edwards‑curve Digital Signature Algorithm (EdDSA): Ed448 and Ed25519. Note that EdDSA requires OpenSSL 1.1.1 or later, which at the time of writing is available only in Ubuntu 18.10 and FreeBSD 12.0 (for details, see How to Enable TLS 1.3 in NGINX Plus.

Note: OpenID Connect support is exclusive to NGINX Plus.

2x Faster NGINX WAF

The NGINX web application firewall (WAF) is our build of ModSecurity for NGINX Plus. ModSecurity is an open source WAF used by over a million sites. We are actively working with the TrustWave SpiderLabs team to improve ModSecurity performance with NGINX Plus, and are happy to report that the latest release performs two times better than previous releases.

This release also adds support for pdateActionById, ctl:requestBodyProcessor=URLENCODED, and the setenv action.

The new NGINX WAF build is based on ModSecurity 3.0.3; for more details, see the TrustWave SpiderLabs blog.

Note: NGINX WAF is exclusive to NGINX Plus.

Other New Features in NGINX Plus R17

TCP Keepalives to Upstreams

The new proxy_socket_keepalive directive controls whether TCP keepalives are enabled between NGINX Plus and the proxied server. TCP keepalives improve performance for protocols (such as WebSocket) where there is a stateful TCP network device between NGINX and the proxied server, over which connections are long‑lived and often idle. Without TCP keepalives, such devices might close idle TCP connections more often, incurring the overhead of re‑establishing them from scratch.

The directive is also available in the FastCGI, gRPC, memcached, SCGI, and uwsgi modules.

Upstream HTTP Keepalive Timeout and Request Cap

The new keepalive_timeout directive sets the maximum time an HTTP keepalive connection between NGINX Plus and the proxied server can be idle before being closed. In addition, the keepalive_requests directive sets the maximum number of requests that can be sent over a keepalive connection (at which point it is closed and a new one created).

Finite Upstream UDP Session Size

The new proxy_requests directive (Stream module) sets the maximum number of UDP packets sent from NGINX Plus to the proxied server before a new UDP “session” is created. This provides for more even load balancing of UDP packets when a single client sends a large number of UDP packets in a short time (which can happen where there is a downstream proxy, for example).

Enhancement to Cluster State Sharing

When using state sharing in a cluster, you can now do server name verification, using SNI to pass the server name when connecting to cluster nodes. This is implemented with the zone_sync_ssl_name and zone_sync_ssl_server_name directives.

Note: Clustering and the zone_sync module are exclusive to NGINX Plus

Updates to the NGINX Plus Ecosystem

Kubernetes Ingress Controller Enhancements

The official Kubernetes Ingress Controller has been updated to version 1.4.0. The changelog lists all changes, fixes, and enhancements, and the most notable ones are highlighted on our blog:

• Extended Prometheus support
• TCP/UDP load balancing
• The Random with Two Choices load‑balancing algorithm is the new default
• Custom annotations

Read more about the official Ingress Controller on our website, and at the GitHub repo.

JavaScript Module Enhancements

NGINX Plus R17 includes a number of enhancements that extend the scope of JavaScript language support:

• arguments objects
• Non‑integer fractions
• Additional time methods: console.time() and console.timeEnd()
• Variables and functions can now be re‑declared

Integration with the NGINX Stream module for TCP/UDP applications has been refactored to use various return functions, including a send() method for modifying ingress traffic. Egress traffic is now available through a callback.

The full set of changes can be found at the NGINX JavaScript Module changelog.

Upgrade or Try NGINX Plus

NGINX Plus R17 includes support for TLS 1.3 which is more secure and performs better than TLS 1.2. If you’re running NGINX Plus, we strongly encourage you to upgrade to Release 17 and TLS 1.3 as soon as possible. You’ll also pick up a number of additional fixes and improvements, and it will help NGINX, Inc. to help you when you need to raise a support ticket.

Please carefully review the new features and changes in behavior described in this blog post before proceeding with the upgrade.

If you haven’t tried NGINX Plus or NGINX WAF, we encourage you to try them out – for security, load balancing, and API gateway, or as a fully supported web server with enhanced monitoring and management APIs. You can get started for free today with a free 30‑day evaluation. See for yourself how NGINX Plus can help you deliver and scale your applications.

The post Announcing NGINX Plus R17 appeared first on NGINX.

Source: Announcing NGINX Plus R17