FortiGate configure manage ip on CLI
Using the CLI to configure Transparent mode Start a terminal emulation program (HyperTerminal) on the management computer. Use these settings: Baud Rate (bps) : 9600 Data bits : 8 Parity : None Stop bits : 1 Flow Control : None At the Login: prompt, type admin and press Enter twice (no password required). Change from NAT/Route mode to Transparent mode. Configure the Management config system settings set opmode transparent set manageip <mng_ip>/<netmask> set gateway <gateway_ip> end Configure the dns config system dns set primary <dns-server_ip> set secondary <dns-server_ip> end