No Image

FortiGate configure manage ip on CLI

2016-03-15 KENNETH 0

Using the CLI to configure Transparent mode Start a terminal emulation program (HyperTerminal) on the management computer. Use these settings: Baud Rate (bps) : 9600 Data bits : 8 Parity : None Stop bits : 1 Flow Control : None At the Login: prompt, type admin and press Enter twice (no password required). Change from NAT/Route mode to Transparent mode. Configure the Management config system settings set opmode transparent set manageip <mng_ip>/<netmask> set gateway <gateway_ip> end Configure the dns config system dns set primary <dns-server_ip> set secondary <dns-server_ip> end  

No Image

리눅스에서 arp cache 삭제/초기화 하는 방법

2015-05-28 KENNETH 0

arp 상태 확인 arp -a 개인적으로 arp -n 을 하면 좀더 보기좋게 정렬되서 -n 을 사용하는게 좋다고 생각한다… 개인적으로 실행하면 아마도 정상적으로 네트워크에 참여한 상황을 기준으로 뭔가 목록(아이피 + mac주소)이 나온다.   초기화 방법 1. 터미널에서 아래 명령을 실행 2. ip -s -s neigh flush all 실행후 다시 ”arp -a ” 또는 ”arp -n” 명령으로 확인해보면 목록이 싹 사라진것을 확인할 수 있다. 윈도우에서의 결과와는 살짝 다름